Dimensions Of The Telesteps Folding Ladder # TE67FR When Folded

Question

Question:

What is overall length when folded up?

asked by: Joe

0

Expert Reply:

The overall length of the Telesteps Folding Ladder # TE67FR when folded is 5'. When folded the width and height are 2-7/8" x 3-1/2".

expert reply by: Kevin C

0

TE67FR Dimensions
(click to enlarge)

Answer 1

The best way to carry a mobile ladder on the back of a trailer is with a fixed ladder like the Stromberg Carlson RV Exterior Ladder part #LA-401 and a carrier like the Stromberg Carlson Lawn Chair Rack part #LA-104. If you don't want to install a…

view full answer...

Answer 2

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the Roadmaster…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 6

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The Demco Hijacker Autoslide #DM8550034 has a weight of 273 lbs. I've added a couple links to video reviews of this hitch for you to take a look at.

view full answer...

Answer 9

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't see these in your…

view full answer...

Answer 10

I spoke to Demco about the Demco Autoslide Locking Plate for Lippert Rhino Pin Boxes part #DM76FR, the side plates are supposed to be angled as that's what provides the clamping force. I would just make sure you have the bolts torqued fully to…

view full answer...

Answer 11

The Telesteps 7' Folding Ladder #TE27FR is 70" from the top rung to the ground. Each step is 11-3/4" from rung to rung. It is also very light weight as it only weighs 24-1/2 pounds. The Telesteps 10' Telescopic A-Frame Ladder…

view full answer...

Answer 12

Yes, the Telesteps Folding Ladder #TE27FR is the 700FLD model that you were looking for.

view full answer...

Dimensions Of The Telesteps Folding Ladder # TE67FR When Folded

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching