Recommended Plug and Play Adapter for a Brake Controller on a 2024 Kia Telluride

Question

Question:

Is there a plug in adapter I can use to install a Prodigy P3 brake controller in a 2024 Kia Telluride?

asked by: Jamey

0

Expert Reply:

Yes, there is! To install a Tekonsha Prodigy P3 Brake Controller item # 90195 in your 2024 Kia Telluride you will need the Tekonsha Plug-In Wiring Adapter item # TK78VR. This adapter will allow you to connect the P3 without cutting or splicing wires.

The connector you're looking for is located behind the driver's side kick panel, just to the left of where the driver's left foot would be when driving.

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 4

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 5

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The…

view full answer...

Answer 6

No, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK74CR will unfortunately not work with your 2023 Kia Telluride with LED lights. Your best bet would be to use a universal wiring harness #C59236 which will work with…

view full answer...

Answer 7

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

The Curt trailer wiring harness part #C93FV would be what I recommend for your 2023 Kia Telluride . This installs easily by plugging inline with your taillights and has a reliable converter box.

view full answer...

Answer 10

Ben, I went ahead and checked, and it looks like none of our hitches like the Curt Trailer Hitch Receiver #C13420 will require you to replace the tailgate latch assembly.

view full answer...

Answer 11

Yes, it does! The Curt Hitch item #C13420 does fit the 2024 Kia Telluride. This hitch is custom fit and bolts to your Kia with included hardware. It is a class III hitch with a 2" receiver that has a 5,000 lbs towing capacity and a 750 lbs…

view full answer...

Answer 12

Hi Steve, Yes, the Inno Cargo Carrier with Removable Cargo Box #IN94MR is designed to protect the items inside from water and other dirt/debris. This cargo box is made with ABS plastic which is impact resistant and won't allow water to pass…

view full answer...