Crossbar Length And Fit Kit For A 2022 Toyota Tacoma Access Cab

Question

Question:

Hi, I just want to confirm the crossbar length for my 2022 Tacoma Access cab with a naked roof. I want to buy the Rhino Vortex since I only need one bar. Also, can I get the fit kit I believe its DK174 but please confirm for one crossbar only? Thanks.

asked by: Cheryl W

0

Expert Reply:

We recommend a 54" crossbar for the Rhino Rack Roof Rack on a 2022 Toyota Tacoma Access Cab with a naked roof. For a single 54" Vortex Bar we have part # RRVA137B

You will need the # DK174 fit kit. I am sorry to say that we do not offer this kit as a half kit, so you would get enough for two crossbars.

expert reply by: Jesse M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount #DTSTBM6600-2S which includes stainless steel hitch balls as well. The Fulton #F97CR you found as well as the similar Curt #C74WR and Brophy…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain…

view full answer...

Answer 9

It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make…

view full answer...

Answer 10

Thanks for all of the info you listed from the RV's Rota Flex pin box. Based on that the pin box model style is the Lippert 1621 so for a Gen-Y gooseneck adapter the correct part number is the #325-GH-8045.

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Crossbar Length And Fit Kit For A 2022 Toyota Tacoma Access Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching