Replacement Prop Rod for Leer HF 650M

Question

Question:

Looking for prop rods for Leer HF 650M 57DR09 and the holders that are on the cover to hold the rods when not in use. Part number is 650117.

asked by: Tony K

0

Expert Reply:

The correct replacement prop rods for your HF 650M are the Replacement Prop Rod Assembly for Leer Tonneau Covers # LE57MR. Then for the clips to hold the prop rods you need the Replacement Prop Rod Clips for Leer Tonneau Covers # LE22RR

expert reply by: Robin H

0

Answer 1

Based on the information you've provided and Pace Edward's replacement chart you would need the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE44MR.

view full answer...

Answer 2

What you're looking for, for your Leer Hard Tonneau Cover #LE44FR is the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers #LE94MR .

view full answer...

Answer 3

It looks like for the HF650M you'll be needing the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR.

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The Hydraulic Line Kit #9579-01 comes with two 18" flex hoses and two 51" steel lines.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Replacement Prop Rod for Leer HF 650M

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching