Replacement Prop Rod For A Leer HF650M Tonneau Cover On A 2022 Ram 1500 Classic

Question

Question:

I am looking for replacement prop rod and prop rod holder clips for my leer cover. HF650M, truck model 57DR19, part number 650296. Thank you for you’re help and support.

asked by: Julian M

0

Expert Reply:

Based on the information you've provided and Pace Edward's replacement chart you would need the Replacement Prop Rod Assembly for Leer Tri-Fold Tonneau Covers # LE44MR.

expert reply by: Kevin C

0

Answer 1

For your 2021 Ram 1500 with the Leer Hard Tonneau Cover #LE57VR you would need part #LE44MR to replace your prop rods.

view full answer...

Answer 2

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 6

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 8

It looks like for the HF650M you'll be needing the Replacement Prop Rod Assembly for Leer Tonneau Covers #LE54MR.

view full answer...

Replacement Prop Rod For A Leer HF650M Tonneau Cover On A 2022 Ram 1500 Classic

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching