Rated Input Power on Convection for the High Pointe RV Microwave

Question

Question:

how many watts on covection? thanks

asked by: Brett H

0

Expert Reply:

The High Pointe RV Convection Microwave # HP49ZR has a rated input power on convection of 1,500 watts.

expert reply by: Bryce D

0

Answer 1

The High Pointe RV Convection Microwave #HP49ZR you found is only designed for mounting inside a cabinet space. To mount a microwave below the cabinet you will need to use an over the range style microwave like the High Pointe #HP94ZR. This microwave…

view full answer...

Answer 2

Yes, you can put metal into a convection microwave like the #HP49ZR ONLY WHEN IN CONVECTION MODE. If you are going to use it as a microwave though you cannot put metal in it.

view full answer...

Answer 3

From my research it looks like what you have right now is a High Pointe microwave that has overall dimensions of 20.5" W x 13.19" H x 20.4" depth, has an output of 1,000 watts and a 1.1 cubic feet oven capacity. The recommended…

view full answer...

Answer 4

The trim plate for the High Pointe RV Convection Microwave #HP99ZR has an overall size of 24" wide x 16.75" tall.

view full answer...

Answer 5

The High Pointe Over the Range RV Convection Microwave #HP94ZR comes with a 1 year warranty. We have very few warranty/returns with these microwaves. If on the off chance something comes up, simply get in contact with us and we will do what we can to…

view full answer...

Answer 6

The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…

view full answer...

Answer 7

The trim kit of the High Pointe RV Convection Microwave #HP99ZR would be used if you were going to mount it in a cut out area. Otherwise you can set it on a shelf like you mentioned. The trim kit would allow it to install using screws. It does not…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Rated Input Power on Convection for the High Pointe RV Microwave

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching