What Size Slot Does AeroBlade Channel Replacement Strip Fit

Question

Question:

Any idea if this fits 2009 Golf factory crossbars? If your not sure, what’s the width of these?

asked by: Jared V

0

Expert Reply:

I do not know if the Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars - 59" Long # TH69JH will fit 2009 VW Golf factory crossbars, but I can tell you they are 3/4" wide so fit that size channel.

expert reply by: Kyle S

0

Answer 1

The Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars #TH69JH installs into the top t-slot, which does help to reduce wind noise. However, it sounds like you may have an OEM roof rack from Audi. I am not sure if this would be…

view full answer...

Answer 2

It looks like you have the Thule Aeroblade bar. The T-slot dimensions are 1/2 inch wide for the top of the opening and 3/4 inch wide at the bottom. The T-slot is 1/8" inch tall.

view full answer...

Answer 3

We do have some potential options that may very well work for your 2021 Kia Sorrento, however without knowing what crossbars you have or what size the top track is, I cannot say for certain. For instance we have the: -Replacement Rubber Strip for…

view full answer...

Answer 4

The Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars part #RRM626 measures 7/8" wide at the top and 1/2" where it installs into the track. I have attached a photo below.

view full answer...

Answer 5

I don't know what roof rack you have but if you are missing the strip for the crossbars that covers the channels that would be why it's whistling. If you have Rhino Rack Vortex aero bars the part #RRM626 would be what you'd need to cover…

view full answer...

Answer 6

Sure thing! What you're needing is the Replacement Vortex Strip #RRM626 which measures 15-3/4" long. Rhino-Rack unfortunately doesn't have full lengths of the strip so you have to piece this out with what you're needing. The nice…

view full answer...

Answer 7

You'll be able to use almost any replacement strip as they are almost always fit for a 3/8 inch channel. I specifically recommend the Thule Replacement Channel Cover 59 inch, part #852-5402-005 or the Rhino Rack Vortex 15-3/4, part #RRM626. These…

view full answer...

Answer 8

The shape of a roof basket like the XTray, part #RMCB01 can make it very loud when travelling, but there are a few things you can do to help it be a little quieter as you're travelling. The first option is to simply remove the roof basket and…

view full answer...

Answer 9

RockyMounts' JetLine Fork Roof Mounted Bike Carrier #RKY1320 mounts on any round and square crossbars and also has the ability to install in the T-slot track on top of a roof rack crossbar such as the Rhino-Rack Vortex aero-style bars like…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

What Size Slot Does AeroBlade Channel Replacement Strip Fit

Product Page this Question was Asked From

Continue Researching