Roof Bike Rack to Fit T-Slot Channel in Rhino-Rack Vortex Aero Crossbars

Question

Question:

Hello Quick question does the RockyMount JetLine roof bike rack work with the rhino rack aero blade bar? If it does fantastic my second question then becomes do you sell just the rubber stripping that goes in the crack of the aero bar? Thanks

asked by: Brandon

0

Expert Reply:

RockyMounts' JetLine Fork Roof Mounted Bike Carrier # RKY1320 mounts on any round and square crossbars and also has the ability to install in the T-slot track on top of a roof rack crossbar such as the Rhino-Rack Vortex aero-style bars like # RRRS143.

We do offer a replacement Vortex Strip # RRM626 for the Vortex rack bars.

expert reply by: Adam R

0

Answer 1

I was able to go to our test fit bays and use a digital dial caliper to measure the top channel on the Rhino Rack Vortex Aero Crossbars #RRVA126B-2, that with the SX Series Legs #RRSX100 are confirmed to fit your 2015 Toyota Sienna with factory…

view full answer...

Answer 2

Most of the strips we carry are sized to fit 3/8 inch channels. I specifically recommend the Rhino Rack Vortex 15-3/4, part #RRM626. These are vortex-patterned strips that will fit 3/8 inch channels and replace your existing damaged or cut strips. If…

view full answer...

Answer 3

You'll be able to use almost any replacement strip as they are almost always fit for a 3/8 inch channel. I specifically recommend the Thule Replacement Channel Cover 59 inch, part #852-5402-005 or the Rhino Rack Vortex 15-3/4, part #RRM626. These…

view full answer...

Answer 4

I don't know what roof rack you have but if you are missing the strip for the crossbars that covers the channels that would be why it's whistling. If you have Rhino Rack Vortex aero bars the part #RRM626 would be what you'd need to cover…

view full answer...

Answer 5

We do have some potential options that may very well work for your 2021 Kia Sorrento, however without knowing what crossbars you have or what size the top track is, I cannot say for certain. For instance we have the: -Replacement Rubber Strip for…

view full answer...

Answer 6

The shape of a roof basket like the XTray, part #RMCB01 can make it very loud when travelling, but there are a few things you can do to help it be a little quieter as you're travelling. The first option is to simply remove the roof basket and…

view full answer...

Answer 7

The Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars part #RRM626 measures 7/8" wide at the top and 1/2" where it installs into the track. I have attached a photo below.

view full answer...

Answer 8

Sure thing! What you're needing is the Replacement Vortex Strip #RRM626 which measures 15-3/4" long. Rhino-Rack unfortunately doesn't have full lengths of the strip so you have to piece this out with what you're needing. The nice…

view full answer...

Answer 9

I do not know if the Replacement Cover Strip with Pattern for Thule AeroBlade Edge Cross Bars - 59" Long #TH69JH will fit 2009 VW Golf factory crossbars, but I can tell you they are 3/4" wide so fit that size channel.

view full answer...

Answer 10

In our experience the various manufacturers of roof racks and rack-mount accessory carriers have designed their respective products to work well together. The T-Slots in the bars of the Rola 59823 will work just fine with Thule, Inno, Lockrack and…

view full answer...

Answer 11

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 12

The truck caps use the rails that the Thule Podium Feet #TH460R are compatible with when you use the Thule Fit Kit for Podium Style Foot Pack #THKIT3101. You would then need the appropriate length crossbar. For an Aero WingBar 53 inch #TH711420 or 60…

view full answer...

Roof Bike Rack to Fit T-Slot Channel in Rhino-Rack Vortex Aero Crossbars

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching