Will The MORryde RV Generator Slide Out Tray # MR79RR Allow For Westinghouse iGen4500 Generator?
Question:
Will the iGen4500 fit inside this slide out tray. And what would the height of the IGen45400 be sitting in the tray [in order to see if compartment height is sufficient
asked by: Donald G
Expert Reply:
According to Westinghouse the iGen4500 is 24.5" long, 17.5" wide and 20" tall. This may not fit inside the MORryde RV Generator Slide Out Tray # MR79RR which has an internal dimension of 24-1/4" wide by 24" deep inside the tray. Since the dimensions listed are measured at the widest point of the generator and the tray is only 2-3/4" deep it may still fit. You would need to measure the widest points on the generator at the 2-3/4" height to verify if it will fit into the tray.
For the overall height with the generator the bottom of the tray is going to sit 2-1/2" above the floor which would put the generator at 22-1/2" tall if it will sit all the way into the tray.
If the generator is too large for the tray you can opt for the MORryde RV Cargo Sliding Tray # MR37FR which has a tray 34-1/4" long by 22-7/8" wide.
Products Referenced in This Question
MORryde RV Cargo Sliding Tray - 36" x 26" - 1 Way Slide - 60 Percent Extension - 800 lbs
- RV Cargo Slides
- Cargo
- Preassembled Tray
- 60 Percent Extension
- 26 Inch Wide
- 1 Way
- 36 Inch Long
- 800 lbs
- MORryde
more information >
Product Page this Question was Asked From
MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" - 100 Percent Extension - 300 lbs
- RV Cargo Slides
- Generators
- Preassembled Tray
- 26-1/4 Inch Wide
- 1 Way
- 25-3/4 Inch Long
- 300 lbs
- MORryde
more information >
Continue Researching
- Shop: MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" - 100 Percent Extension - 300 lbs
- Q&A: Can Generator Be Ran While Installed on MORryde RV Generator Slide Out Tray
- Video: MORryde RV Generator Slide Out Tray Review
- Video: Interaction with the MORryde Slide Out Tray
- Shop: Kwikee RV Slide Out Refrigerator Tray - 28-1/16" Long x 33-5/16" Wide - 200 lbs
- Shop: MORryde RV Generator Slide Out Tray - 22-3/4" x 16-1/2" - 100 Percent Extension - 250 lbs
- Search Results: generator sliding tray
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: morryde
- Article: Stability Control for Heavy Duty Vehicles
- Shop: Suspension Enhancement
- Shop: MORryde RV Generator Slide Out Tray - 19-1/4" x 23" - 100 Percent Extension - 250 lbs
- Q&A: Recommended MORryde RV Generator Slide Out Tray for Predator Generator
- Shop: MORryde RV Cargo Sliding Tray - 90" x 39" - 2 Way Slide - 60 Percent Extension - 800 lbs
- Search Results: generator tray
- Shop: Fifth Wheel Hitch
- Q&A: Is This Tray Designed To Slide Out To Run The Generator Outside of the Compartment?
- Search Results: generator slide
- Shop: RV Jack Pads
- Search Results: rv sliding tray
- Shop: MORryde RV Generator Slide Out Tray - 15-3/4" x 23-1/8" - 100 Percent Extension - 250 lbs
- Shop: Trailer Wiring
- Video: Review of MORryde RV Cargo Slides - Sliding Generator Tray - MR79RR
- Q&A: Ground Clearance For The MORryde RV Generator Slide Out Tray # MR79RR
- Search Results: generator slide out
- Shop: RV Camera
- Shop: MORryde Hidden Storage Tray for RVs - 22" Long x 32" Wide - 70 Percent Extension - 25 lbs
- Q&A: How to Tell if Dexter Axle 3,500 lb Electric Trailer Brakes Will Fit Axle
- Video: MORryde RV Cargo Sliding Trays Height Adjustment Kit Review