What Part of Reese Steadi-Flex Weight Distribution RP66558 Should be Lubricated

Question

Question:

I have your RP66558 hitch. What should be lubricated?

asked by: Rich B

0

Expert Reply:

Thank you for your purchase from etrailer of the Reese Steadi-Flex Weight Distribution # RP66558. I took a look at the instructions and they say you just need to lightly lubricate the hitch ball before each use.

expert reply by: Kyle S

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W Continuum Weight…

view full answer...

Answer 3

Yes, you can get a set of lighter spring bars for the 8,000 lbs Blue Ox TrackPro Weight Distribution w/ Sway Control item #BLU67FR. They are the Replacement 600-lb Spring Bars for Blue Ox TrackPro Weight Distribution System item #BLU82FR.

view full answer...

Answer 4

The weight distribution system that has the best sway control and is properly rated for your tongue weight that will be between 450 and 500 lbs is the Reese Strait Line part #RP66083. This would be my first pick as your best option as it has a tongue…

view full answer...

Answer 5

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp on…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

For a loaded tongue weight of 565 lb the Reese Steadi Flex kit part #RP66558 would be properly rated and would work great.

view full answer...

Answer 8

Hey Dennis, we have a replacement 7-way plug with the part #A7WCB which would work great to replace your damaged one. I attached a diagram for 7-ways for you to check out as well.

view full answer...

Answer 9

The Electric Jack w/ Footplate and 7-Way Plug #EJ-3527-BBX uses a 7-way RV-style plug. I have included a diagram that shows the pin-out for RV style 7-way plugs. This will show you what each pin does. I have also listed the functions below and linked…

view full answer...

What Part of Reese Steadi-Flex Weight Distribution RP66558 Should be Lubricated

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching