Recommended Hitch for a 2024 GMC Savana Van
Question:
I just got a 2024 GMC fullsize van for work and I need to add a hitch to it. Which one do you recommend?
asked by: Wendy
Expert Reply:
Congrats on the new work van! To add a hitch to your 2024 GMC Savana Van, I recommend the Curt item # 13040. This hitch is custom fit and bolts to your van with included hardware. This is a class III hitch with a 2" receiver. It has a 6,000 lbs towing capacity and a 600 lbs maximum tongue weight. These capacities can be increased to 10,000 lbs and 1,000 lbs when used with a weight distribution system.
I really like the Curt hitch item # 13040 because it tucks in right below your rear bumper and doesn't mess with your van's ground clearance.
It sounds like you are planning on towing, so you will also need a wiring harness item # 55540 and a ball mount kit item # C45534.
I have attached a couple of pictures below along with a some installation videos so you can see how to get these parts set up and what this hitch looks like once installed.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How to Get Replacement Mounting Hardware for a Curt Trailer Hitch
- Q&A: Trailer Wiring Harness for a 2013 Chevy Express Van
- Q&A: Trailer Hitch That Fits 2008 Chevy Express 3500 Van Cutaway
- Q&A: Determining if 2019 Chevy Express Van has Tow Package for Installing Trailer Wiring
- Q&A: What Wire Size Is Needed For 12 Volt Power On Truck To Operate Interior Lights On Camper
- Q&A: Trailer Hitch and Wiring for a 2000 Chevy Express Van Cutaway with Dual Rear Wheels
- Q&A: Trailer Hitch Recommendation for a 1999 Chevy Express Cut Away Van with Dual Rear Tires
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop