Wheel Center Cap for Sendel 16 inch Trailer Wheel

Question

Question:

Im looking for a center hub cover for Sen Del wheels 25 16X6J. After market preferred. There are no markings on the existing cap.

asked by: David A

0

Expert Reply:

16 inch Sendel wheels like the part # AM22662 have a pilot diameter of 4.9 inch so for a wheel center cap you'd need the part # LHCS109-SI60C.

expert reply by: Jameson C

0

Answer 1

For your Dometic Duo Therm AC, you can use the Replacement RV Air Conditioner Cover for Dometic Duo-Therm #DMC69FR for a replacement.

view full answer...

Answer 2

I have attached a sheet which shows the torque specs for wheels you can use when putting a tire and wheel. For 1/2" wheel bolts on a 13" aluminum wheel the torque is 75-85 ft.-lb. For lug nuts you can use the Lionshead Trailer Wheel Lug Nut…

view full answer...

Answer 3

Since you have the Dometic Duo-Therm air conditioner, the correct replacement shroud for you is the: -Replacement Shroud for Dometic Duo-Therm RV Air Conditioner #DMC69FR. Attached is a product overview video for you to check out.

view full answer...

Answer 4

I show that the wheel lug size for Dexstar Vintage Steel Wheel #AM20312, which you reference is 1/2 inch x 20, therefore you will want Americana Trailer Wheel Lug Nut #AM90049. These trailer wheel lug nuts fit 1/2" diameter wheel bolts and are…

view full answer...

Answer 5

If you're getting that much bounce out of your trailer that would lead me to believe that maybe the MORryde IS suspension system is the actual issue. Typically if the suspension is too stiff you'll start to bounce. We see this issue a lot…

view full answer...

Answer 6

Your center hole measurement of 4 13/16" converts to 4.81" in decimal form. The Trailer Wheel Center Cap, Chrome, 4.82" Pilot Size, part #482EZ, should work. This center cap works with front and rear wheels. I have included a product…

view full answer...

Answer 7

Thank you for all of the information and pictures! It looks like you should at least have some wiring already run on your 2019 Chevy Express Van 3500 so I'm just as confused as to why you don't have a round plug with a cap inside the…

view full answer...

Answer 8

A hub-centric wheel centers upon the portion of the hub that protrudes through the pilot hole in the wheel, instead of on the lug nuts like a lug-centric wheel would. A wheel with a 4.77 inch pilot diameter would fit perfectly on your hub. The 2…

view full answer...

Answer 9

To measure the pilot hole on your wheel, you will need to remove the cap in the picture and then measure the inside diameter of the hole in the wheel. Most wheels with the bolt pattern you have in the photo are 4.88 inches or 4.9 inches with a select…

view full answer...

Answer 10

We do not carry any Cannon products, however a temperature light flashing usually indicates that the fridge has a lack of power. I recommend checking with your owner's manual for the required amperage for operation, and ensuring that you are…

view full answer...

Answer 11

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

view full answer...