Bolt Hole Dimensions for etrailer Hitch that Fits 2020 Ford Transit T350

Question

Question:

What is the bolt hole measurement for a 2020 transit van?

asked by: Nick

0

Expert Reply:

The distance between the mounting holes for the etrailer hitch part # e98842 that fits your 2020 Ford Transit T350 is 35-1/2 inches from left to right and the bolt holes on the frame rail are 2.43" center on center and 6.13" center on center.

expert reply by: Jameson C

0

spacing
(click to enlarge)

Answer 1

The available trailer hitches for the 2016 Ford Transit T350 are not designed to fit the cab and chassis/cut away models but we do have options that you could use. The most popular option is #13703. It can actually be bolted on or welded on.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...

Answer 7

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 12

There is one superb option to carry your RadWagon Electric Cargo Bike, which is definitely a unique bike, with a wheelbase of about 50 inches and weighing in at over 70 lbs. With those specs the best bike rack for your RadWagon is the Hollywood…

view full answer...

Bolt Hole Dimensions for etrailer Hitch that Fits 2020 Ford Transit T350

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching