Lock For Fulton Hi-Mount Spare Tire Carrier

Question

Question:

I want to get an Hi-Mount spare tire carrier like the FSTC1000301 but I want a wheel lock. Which combination should I get?

asked by: Shawn

0

Expert Reply:

While there isn't an individual high-mount spare tire carrier and lock set, you can add a wheel lock to go with the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels # FSTC1000301.

Assuming you have 1/2" wheel bolts, all you need is the Wheel Lock Set for 1/2" Wheel Bolts # RG01-150.

expert reply by: Kyle S

0

Answer 1

You will be okay to mount the Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels Item #FSTC1000301 to your cargo door as long as your door can support the weight and secure the mount. The photo you attached looks like the hinges are sturdy…

view full answer...

Answer 2

Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…

view full answer...

Answer 3

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 6

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 7

There are going to be two parts to the handle that you will need to operate the Lippert Components Spare Tire Winch part #LC159056. The first of which is the intermediate shaft or what Lippert calls a Crank Extension part #LC1315411. This will be…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

Although I am not quite sure what spare tire winch came on your 2007 Coachmen Freelander Class C Motorhome, we do have the universal Lippert Components Spare Tire Winch with Offset Cable #LC159056. Simply click on the hyperlinked part number to order…

view full answer...

Answer 10

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Lock For Fulton Hi-Mount Spare Tire Carrier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching