Replacement Hubs and Brakes for UFP HD-1877-10
Question:
I have a boat trailer with hydraulic brakes that I need to replace the complete assembly with the backing plates and drums. The brake drum/hubs that I have on it now are UFP HD-1877-10. I need to replace both sides. Thanks for your help.
asked by: Martin
Expert Reply:
I reached out to Dexter and found that the UFP-HD-1877-10 fits a standard 3,500 lb axle. For a hub and drum replacement you can use the # AKHD-545-35-EZ-K or for a galvanized option # AKHD-545-35-G-EZ-K. Then for hydraulic drum brakes you can use the # AKUBRK-35 or # AKFBBRK-35-D with a Dacromet coating.
I have attached some installation videos below for your reference.
Products Referenced in This Question
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hydraulic Trailer Brake Kit - Uni-Servo - 10" - Left and Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Top Gifts for Dads in 2024
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Q&A: Does Lippert Spare Tire Winch Lock or Hold in Any Position?
- Q&A: How is Lippert Spare Tire Winch LC159056 Raised and Lowered
- Q&A: How Does Lippert Components Spare Tire Winch with Offset Cable Crank Up and Down
- Q&A: Weight Capacity Of Lippert Spare Tire Winch For Over sized Tire
- Q&A: Inside Diameter of Replacement Crank Extension for Lippert Spare Tire Winch Assemblies
- Q&A: Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Most Popular Wheel Bearings
- Article: How to Charge a Dump Trailer Battery
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Best RV Roof Vents