Availability of 63 inch Short Arm Solera Awning Replacement

Question

Question:

I need the LH control arm assembly 63” long 33” to the connection point from the bottom. Black. Power Solera. Can you help?

asked by: Shawn M

0

Expert Reply:

We do have the replacement short arm assembly that is 63 inches in black with the part # LC404523. This can be used on the left hand or right hand side.

expert reply by: Jameson C

0

Answer 1

We have replacement pitch arms for the Solera 69 inch awning setups like what you have with the part #LC375994 which would be all that you'd need.

view full answer...

Answer 2

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 3

I contacted Trimark in regards to a replacement part for the Trimark 030-0900. 030-0900 is actually a series number not a specific part number. To find the part number you will need to take the interior handle completely off the unit. On the back…

view full answer...

Answer 4

We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by…

view full answer...

Answer 5

The Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100 measures 4-1/2 inches in diameter on the outside and the Safety Chains #AM3109 fit around the adapter, as you can see in the accompanying photo. So as long as your gooseneck…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I did check that SKU on the tag you sent and it corresponds with a pretty pricey replacement for just one and while we do not carry the exact replacement we do have another solution that you might be interested in. What you could also do if you…

view full answer...

Answer 8

What I think you are asking in your question is are there replacement pitch arms available for the Solera power Awning, such as the Solera 12V XL Power RV Awning - 20' Wide, #LCV000334969-362243. Yes, we have the Replacement Pitch Arm Assembly…

view full answer...

Answer 9

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 10

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 11

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 12

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

view full answer...

Availability of 63 inch Short Arm Solera Awning Replacement

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching