K08-201-9B Hub And TRU37FR Spindle, What Will Be The Distance From The Brake Flange To The Hub Face
Question:
Can you please tell the distance from the front of the brake flange to the Hub Face using #42 spindle # TRU37FR and the Dexter hub/drum #K08-201-9B and Dexter trailer brakes with parking #23-112-113. I am trying to work out the correct tire offset.
asked by: Jake
Expert Reply:
With the hub # K08-201-9B and brakes # 23-112-113 in place on the # TRU37FR spindle, the hub face will be 4-1/4" inches out from the front side of the brake mounting flange.
Products Referenced in This Question
Dexter Electric Trailer Brakes - Parking Brake Ready - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly - 6,000 lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
#42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Dimensions of TRU37FR Replacement E-Z Lube Spindle
- Q&A: Dimensions of Trailer Spindle TRU37FR
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Where to Attach Safety Chains When Using a Gooseneck Plate in 5th Wheel Rails
- Article: Trailer Tire Sizing
- Q&A: How To Remove Spindles From Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub/Drum and Brake Assemblies for Dexter 12k Axle
- Q&A: Proper Replacement for Reliable ACT-7.5K Brake Actuator
- Q&A: How Can the #42 E-Z Lube Spindle Fit Both a 5.2K and 7K Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers