What Diameter Tube Does Thule Frame Cradle for Helium Bike Rack Fit

Question

Question:

I believe you have the Replacement Cradle for Thule Helium Pro Bike Rack - Item # 1500056001 for sale. I have a rack with 1 round bars that looks similar to the Thule and I think these would work with it. I just need to know the dimension of the mounting tube that this will fit to make sure it will work with my rack. Thank you.

asked by: Kris K

0

Expert Reply:

The cradle part # 1500056001 that you referenced is designed to fit a 1-1/4 inch diameter tube.

expert reply by: Jameson C

0

Answer 1

The 2-Bike Extension on the Hollywood Racks Sport Rider SE 4-Bike Platform Rack #HR1400Z referenced in your question will attach to the main assembly via a standard integrated pin. While the pin and extension piece cannot physically be locked to the…

view full answer...

Answer 2

There are a few platform style bike racks that can be converter from 2 bike racks into 4 bike racks. I'll provide a short list below: - Hollywood Racks Sport Rider SE #HR1450Z and add on #HR1475Z or #HR1400Z (complete 4 bike rack) - Swagman…

view full answer...

Answer 3

To replace the cradles on your Thule Helium Rack item #TH9043PRO or item #TH9042PRO you will want the Replacement Cradle for Thule Helium Pro Bike Rack item #1500056001. These are sold individually.

view full answer...

Answer 4

Over time the cradles on your Thule Helium are going to expand a bit, especially with use and moving them around. I would say this is an instance of unless you're having issues with them, there's not a reason to replace them. It looks like…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

At the ends of the arms on Thule bike racks that take the Hold Fast cradle #7521513002 there are end caps that usually have to be removed in order to remove the old cradles and put on the new ones. These caps can either have a screw holding them on…

view full answer...

Answer 8

The Replacement Anti-Sway Cradle #1500056002 is the correct cradle for your Thule Helium Pro 3 bike rack #TH9043PRO. Alternatively, you could also use Replacement Cradle for Thule Helium Pro Bike Rack #1500056001 which is also confirmed to fit your…

view full answer...

Answer 9

Thanks so much for the photos, they were very helpful. To replace all four cradles, what you need is two of the Replacement SuperCush Anti-Sway Cradle and ZipStrips #8880598 (which has the upper and lower ZipStrip) along with two of the Replacement…

view full answer...

Answer 10

I checked with Roadmaster and the overall length of the Replacement Stabilizer Bar #RM-B001225 overall is 35-3/4 inches.

view full answer...

Answer 11

I called my friend over at Thule and they said they do not have the replacement knob available separately. The Replacement Knob for the Thule Apex #TH79JV is a different part number with only the Thule Apex and the Thule Raceway as confirmed fit.…

view full answer...

Answer 12

It sounds like the core is not responding to the key. I recommend using some penetrating oil on the inside of the lock core and then driving around for a little bit to let the vibration allow the oil to get into all the small areas. If it is just a…

view full answer...

What Diameter Tube Does Thule Frame Cradle for Helium Bike Rack Fit

Product Page this Question was Asked From

Continue Researching