Solution to Allow Older Thule Square Crossbars to Fit Truxedo TS Rails of Tonneau

Question

Question:

I have Truxedos TS Rails t-slot bed rail accessory. I also have old Thule square bars without the slots that are wide enough for the bed. I see an Inno feet kit might work to mount these there, model INXP IN-XP? IF yes, does the INXP come with everything to attach to the TS Rails T-slots or is there a specific fit kit for the Inno feet that does this?

asked by: James F

0

Expert Reply:

The Inno foot kit part # INXP does fit the TS rails of your tonneau cover and is compatible with your Thule older square bars so it would be the solution you are looking for.

expert reply by: Jameson C

0

Answer 1

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 5

I have a solution for you. Yes, the parts that you listed are correct for a complete roof rack system on your 2016 Lexus GX 460. However, the crossbar dimensions of the Inno Aero Crossbars #INXB123-130 are not compatible with the Malone Profile18S…

view full answer...

Answer 6

For your 2007 Subaru Forester with raised side rails we have the Inno roof rack part numbers #INB117, #INTR, #INTR104 that INNO recommends as a fit. The bars that come with this, #INB117 are 46 inches long. If you wanted the longer 58 inch bars…

view full answer...

Answer 7

For your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars #INB117, with the feet #INTR, and the fit kit #INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point for…

view full answer...

Answer 8

For your 2017 Lexus GX 460 your vehicle either comes with flush rails or a naked roof without rails. The Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 3 #RRVA126B-3 are a fit when you also use the following: -RCH Legs for…

view full answer...

Answer 9

The Inno Aero Crossbars - Aluminum - Black - 45" Long and 48" Long #INXB115-123 by themselves can handle 165 lbs, yes. The part that makes it a little confusing is when you get into vehicle fitment because the roof or mounting points may…

view full answer...

Answer 10

Thank you for the photos! It looks like your 2018 Lexus GX 460 has the flush mounted rails. We have some roof rack options that fit your vehicle and have parts that could potentially fit other SUVs but I would need to know what they are to confirm…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Solution to Allow Older Thule Square Crossbars to Fit Truxedo TS Rails of Tonneau

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching