Locking Hitch Pin Kit Recommendation for B&W Tow & Stow 3-Ball Mount - 3" Hitch

Question

Question:

Which locking pins fit this? I need a set of at least 3 just wondering which ones fit

asked by: Tyler

0

Expert Reply:

The locking hitch pin kit I recommend for your B&W Tow & Stow 3-Ball Mount - 3" Hitch # BWTS30048B is part # IR29FR which is rated for 21K and gives you matching locks for the hitch receiver, ball mount platform, and the hitch ball itself. This was you can lock all of the parts of your Tow & Stow using the same key.

expert reply by: Jon G

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hi Robert, To install your Putco Blade LED Tailgate Light Bar #P22KR you'll need to just remove the tail lights so that you can get access to the back wiring in the back of them. The plug-and-play connectors on the wire harness with have a male…

view full answer...

Answer 5

There are a select few fifth wheel hitches that have replacement leg kits that would adapt them to fit the OEM prep package of your Dad's 2023 GMC Sierra 3500 but I would need to know what hitch you guys have to be able to determine if that's…

view full answer...

Answer 6

There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…

view full answer...

Answer 7

We can get your 2024 Chevy Silverado 1500 4x4 set up with a complete system for flat towing, and I'll go ahead and list out all the parts you need to make it easy to order: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit #RM86MR - Tow…

view full answer...

Answer 8

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If your 2021 Keystone Cougar 22MLSWE had 2,000 lb axles the part #TMK54ZR would be correct for it but I do not believe that is what you'd need although I was not able to verify the axle capacity of the trailer. A more likely axle capacity you…

view full answer...

Answer 11

The spacer/washer you're referencing on the #GY23XR sits underneath the plate. The only thing on top will be the nut and cotter pin as seen in the picture below.

view full answer...