Solution for Needing 2 inch Hitch Adapter for Thule T2 XTR Bike Rack

Question

Question:

Hi - I have a 2024 Subaru Crosstrek twith a 2inch hitch - installed by Subaru. I have a Thule T2 Pro XTR 2 Bike Hitch Rack with a 1.25inch post. Will this adapter work so I can use my 1.25inch rack with a 2inch hitch? Thank you,

asked by: Bunny S

0

Expert Reply:

Since the Thule T2 XTR uses a hitch pin that has an autoattach there isn't a 2 inch hitch adapter like what you mentioned that would work. Best option would be to use a hitch reducer like the part # e58YR.

expert reply by: Jameson C

0

Answer 1

Installation of the etrailer #e27KR will likely interfere with the hands-free liftgate sensor or cause loss of functionality on your 2024 Acura MDX. However, we have had some customers manage to relocate the sensor on their own so it will continue…

view full answer...

Answer 2

We've received conflicting reports regarding whether or not the Curt #C22HR or the Draw-Tite #DT42MR interferes with the hands free liftgate feature of the 2022 Acura MDX. We've had some state that the hitch partially interferes with…

view full answer...

Answer 3

On your Thule Apex XT 4 Bike #TH9025XT, the pin should go into your trailer hitch receiver hole and into the rack shank on the one side only. It won't go all the way through to the other side but will solidify the rack in place and then you…

view full answer...

Answer 4

There is a replacement shank/stinger for the Thule T2 XTR with the part #TH37MY but the one for the Classic would not work on the XTR.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Solution for Needing 2 inch Hitch Adapter for Thule T2 XTR Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching