Is There An Easy Plug-In Diode Kit For A 2022 Jeep Cherokee Trailhawk

Question

Question:

I am looking for an easy light wiring kit for a 2022 jeep cherokee trailhawk. I want to tow the jeep behind a motor home. Thanks

asked by: Robert G

0

Expert Reply:

There unfortunately is not a plug-in style diode kit available for your 2022 Jeep Cherokee Trailhawk so you'll have to either use magnetic lights or a splice-in diode kit. For magnetic lights you can use the Tow Ready Magnetic Tow Lights # 73864.

For a splice-in diode kit you can use the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267, unless you have ParkSense Proximity Sensors in which case you'll need Smart Diodes # RM63MR instead.

If you haven't picked out the rest of your flat towing components then I have the following recommendations for you:

Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521451-5.

Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to buy them separately or worry about them dragging on the ground.

Braking System: If your motorhome has air brakes then I recommend the Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes # SM99243 and for hydraulic brakes the Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251.

The brake light switch wire in your Cherokee isn't useable so you'll need to also install the Roadmaster Stop Light Switch Kit # RM-751471 in order to get the brake signal for either system's indicator light.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

For a 2023 Jeep Wrangler 4XE you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These custom-fit baseplates are designed to work with factory bumpers, if you have an aftermarket bumper please…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

The wiring kit to flat tow your 2022 Jeep Cherokee Trailhawk does not include a charge line to the battery, so you would need to get one separately and install that so the battery does not die. If your motorhome does not have a charge line you would…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 12

The Air Lift WirelessONE Compressor System #AL25980EZ and Air Lift WirelessONE Compressor System #AL25980 are nearly identical with only some very minor differences in CFM and duty cycle ratings. The #AL25980EZ will also come with an easier mounting…

view full answer...