List of Channel Covers for a Set of Crossbars on a 2023 Tesla Model Y

Question

Question:

Do you sell longer versions of this product:

asked by: Bernard G

0

Expert Reply:

Of this one, no. The Replacement Vortex Strip for Rhino-Rack Vortex Aero Crossbars # RRM626 is the longest version of this product at 15 3/4".

If you can let me know what length you're looking for, I'd be happy to find something that'll work; if not, you can check out the link below which shows all of our channel covers.

expert reply by: Bryce D

0

Answer 1

I may have a solution for you but if you have the Model 3 roof rack by Tesla on your 2020 Tesla Model 3, then we do not have a channel cover specifically designed to fit your roof rack. If the opening in your roof rack is open then it will cause…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

view full answer...

Answer 4

Thank you for the pictures of your coupler. You are going to need to replace your entire surge actuator coupler as the A-50 is obsolete and we do not have any parts to repair it. We have the Dexter DX7.5L A-60 Brake Actuator #DX73FR which you can…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

For a replacement I recommend the Dexter DX7.5L A-60 Brake Actuator #DX27FR. The swing-away actuators like your old A60 have been discontinued, along with replacement parts, so this is the best solution. This features a 7,500 lb trailer capacity,…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The largest tire we offer that will fit on a 15" trailer wheel is a 225/75-15 which measures 28.4" diameter x 8.9" wide so you will need to make sure you have room(4"-6" from top of tire to bottom of fender). The best option…

view full answer...

Answer 10

It is possible to lift your trailer. You can do this by moving the axles from being above the leaf springs to below the leaf springs. The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is…

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

List of Channel Covers for a Set of Crossbars on a 2023 Tesla Model Y

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching