Can Firestone Ride Rite kit part # F2709 Fit Vehicle with Rear Sway Bar

Question

Question:

Will this work with a vehicle equipped with a rear sway bar?

asked by: Dowell S

0

Expert Reply:

Yes, the Firestone Ride Rite kit part # F2709 will work great installed on a vehicle with a stock or aftermarket rear sway bar.

expert reply by: Jameson C

0

Answer 1

Yes, you can install the Firestone Ride Rite kit part #F2709 on your 2015 Chevy Silverado 2500 with a lift kit. Firestone states for 1-2 inch lifts they don't normally require any type of spacer so the kit will install and work just fine.

view full answer...

Answer 2

I have attached a list of all the airbag kits that will fit a 2016 Chevrolet Silverado 2500HD. However, not all of them will work with 5th wheel brackets. The best set we have that will are the Firestone Ride-Rite Air Helper Springs part #F2709. This…

view full answer...

Answer 3

Air bag kits like the Firestone Ride-Rite Rear Axle Air Helper Spring Kit #F2709 are intended to provide load support with a truck bed cargo load or to reduce sag when hitched to a trailer. Air springs do not so much directly lift the rear end as…

view full answer...

Answer 4

Typically block lifts are body lifts which do not add distance between the axle and the frame. If that's what you have then the Firestone Ride Rite kit part #F2709 would fit as-is. If you do have a lift that adds distance between the axle and the…

view full answer...

Answer 5

Sounds like you are looking for a anti-sway bar which will minimize sway and driver fatigue by improving the stability and drivability of your vehicle. The bar on this sturdy, effective anti-sway system mounts to the rear axle and to the frame to…

view full answer...

Answer 6

I can definitely help and point you in the right direction. Both brands make a great quality air bag kit. Personally I prefer the Firestone Ride-Rite #F2709. The air bags themselves are known to be more durable than others. They can hold more PSI…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi Mike, good question so I checked directly with Firestone for you and can verify that yes, the Ride-Rite air springs you asked about do fit the 2024 Chevy Silverado 2500 ZR2. The correct part number is the following: - Firestone Ride-Rite Air…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Can Firestone Ride Rite kit part # F2709 Fit Vehicle with Rear Sway Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching