Recommended Timbren Springs For a 2022Jayco Greyhawk 29MV on Ford E-450 Cutaway Chassis

Question

Question:

Need a part number for Timbren rear suspension for a 2022 Jayco Greyhawk 29 MV with j ride. Thanks

asked by: Jim W

1

Helpful Expert Reply:

The Timbren Rear Suspension Enhancement System # TFERSD is the system you need for your 2022 Jayco Greyhawk 29MV on the Ford E-450 cutaway chassis with J-Ride. The System # TFERSDLB has a higher capacity of 12,000lbs versus the 5,600lbs. This higher capacity will allow a lot more bounce to occur on the chassis than absorption giving you a harsher ride quality.

expert reply by: Bud M

1

Answer 1

I recommend installing the SumoSprings #SSR-106-47-1 on the rear of your 2023 Ford E-450 Class C cutaway chassis. In my experience I feel these are the best option as they cushion the suspension while the Timbren #TFERSD you found is much stiffer and…

view full answer...

Answer 2

I would be happy to help! Since you already have the Timbren front bump stops installed on your 2018 Thor Vegas 24.1' Class A Motorhome built on the E-450 chassis there is no reason to replace them. I would keep them and just add the Timbren Rear…

view full answer...

Answer 3

I do have some options for you, but JayRide will definitely be a limiting factor when installing SumoSprings on your 2021 Jayco Redhawk Motorhome. For the rear axle we have the #SSR-130-54 which are the 2,800 lb capacity jounce springs. For the front…

view full answer...

Answer 4

For your 1997 Ford E-450 Motorhome you could use SumoSprings Solo Custom Helper Springs Front Axle #SSF-106-47 as they are confirmed to fit. However, this setup has a 1,000lb weight capacity and is meant for light duty applications. For your…

view full answer...

Answer 5

I would be happy to help you determine if the Timbren Rear Suspension Enhancement System #TFERSD you were looking at for your 2020 Jayco Greyhawk 26Y will work with the Hellwig Helper Springs. Based on the information I can find the Hellwig Helper…

view full answer...

Answer 6

The correct fitting SumoSprings for your 2020 Thor motorhome built on an E-450 cutaway chassis is the part #SSR-130-54 which will provide up to 2,800 lbs of rear suspension support. This will make your ride quality feel much more stable and reduce…

view full answer...

Answer 7

Unfortunately the most comfortable ride can be subjective. My suggestion is that if at present time you have hard contact with factory axle bump stops on frame and a very rough or unstable ride in turns, I would definitely select the Timbren Front…

view full answer...

Answer 8

The Timbren #TFERSD Aeon springs you'd looked at would be a fit for your motorhome on a 2021 Ford E-450 cutaway van chassis. Timbren makes a great product, but the springs are pretty stiff and my fear is that you won't be happy with the ride…

view full answer...

Answer 9

I recommend the SumoSprings Custom Helper Springs for a 2017 Thor Chateau 31W. These are one of the most common upgrades made on motorhomes and they do a great job of reducing sway and improving stability. The correct kit is part #SSR-106-54-1 for…

view full answer...

Answer 10

The Timbren Rear Suspension Enhancement System #TFERSDLB, along with any other jounce-style spring, will not increase rear bumper on your vehicle to prevent bottoming out. This system is made to maintain the vehicle's factory ride height when…

view full answer...

Answer 11

If you are always towing with a vehicle such as your 2018 Forest River 3251 DS LE I'd go with the Timbren setup part #TFERSDLB that you mentioned. This installs easier and since it's maintenance free it's the easiest and best solution for…

view full answer...

Answer 12

Between the two part numbers #SSR-130-54 and #SSR-130-47 the key difference is the amount of support each will provide for your 2021 Ford E-450 Class C motorhome. The 47 provides 1,500 lbs of additional support whereas the 54 provides 2,800 lbs. To…

view full answer...