Spacer Kit for Rhino-Rack Vortex Crossbars to Clear Retrax XR Tonneau Cover Handle

Question

Question:

I want to install this crossbar kit on my truck but I have the Retrax XR cover and I want to keep the locking sliding handle from hitting the underside of the crossbars. Is there a space or taller legs mounts or anything I can use?

asked by: Edwin

0

Expert Reply:

Yes, to keep the Rhino-Rack Vortex Crossbars # RRVA180B-RRRLT600 from interfering with the operating handle on your Retrax XR cover you just need the Roof Rack Leg Spacer Blocks # RRQMVA25.

These will raise the crossbars 25 mm (0.98") more above your cover which will be enough to clear the handle. I'm attaching a photo another customer sent in who used this kit to solve this exact issue!

expert reply by: Jon G

0

Rhino-Rack Vortex Bar Clearance with Spacer Kit Installed
(click to enlarge)

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

I have some great roof rack options compatible with the Retrax XR Series Tonneau Covers. The most heavy duty option would be the Yakima OutPost HD Overland Truck Bed Rack part #Y01152-5955 which offers up to a 300 lb capacity. Unfortunately, you…

view full answer...

Answer 3

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 6

When installing an awning like the Solera Smart Arm 12V Power RV Awning #LC517486, the arms will be secured to the wall framing. When the awning extends there will be quite a bit of leverage, so it is important to mount the awning to an area where…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

Sorry, John. We do not have any Rhino-Rack keys for the lock code 290. Typically the best route to go is changing all your Rhino-Rack lock cores to their more premium keys so you can have all your accessories keyed alike as well. Here is a list of…

view full answer...

Answer 10

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Spacer Kit for Rhino-Rack Vortex Crossbars to Clear Retrax XR Tonneau Cover Handle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching