What Size Lunette Rings Are Compatbile With The Buyers Products 45 Ton Pintle Hook

Question

Question:

what size luneete ring can i use with this for inside measurement and part number

asked by: Darwin

0

Expert Reply:

The Buyers Products 45 Ton 6-Hole Air Compensated Pintle Hook # 337P45AC6 can handle lunette rings with an inner diameter from 2.38" to 3.00" wide. If you don't already have the lunette ring you could use one like the Buyers Products 3" I.D. Heavy-Duty Forged 4-Bolt Mount Lunette Ring # 337BDB1394.

expert reply by: Kevin C

0

Answer 1

The mounting kit that is recommended for use with the 60k Buyers Products Pintle Hook part #337PH30 is the part #3378530 but this is only the hardware to mount the hook and does not include a plate. The hook has a capacity that's higher than any…

view full answer...

Answer 2

The bolt holes from left to right on the Buyers Products Pintle Hitch Plate Mount part #337PH50 are separated by 5 inches and from the top to middle the distance is 2-3/8 inch and then from middle to bottom is 2-1/8 inch.

view full answer...

Answer 3

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 4

The center hole required for the Buyers Products 30 Ton Heavy-Duty Swivel Type Pintle Hook #337BP760A needs to be 2-1/16". I have attached a picture below of the mounting plate dimensions and hole placement.

view full answer...

Answer 5

The mounting holes for the Buyers Products 45 Ton 6-Hole Air Compensated Pintle Hook #337P45AC6 are spread 5" apart horizontally. The bottom 2 holes are spread 2-1/8" vertically while the top 2 holes are spread 2-3/8" vertically. I…

view full answer...

Answer 6

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Answer 7

I attached a picture that has all of the mounting hole dimensions for the pintle portion of the Buyers Products 45 Ton 4-Hole Air Compensated Pintle Hook Kit with Brake Chamber and Bracket #337P45AC4K.

view full answer...

Answer 8

The best option we offer for installing standard trailer hitches on semi-tractors is with the Buyers Products Fabricators Hitch Plates which will be welded to the back of the frame with extra bracing and gussets. This will require professional…

view full answer...

Answer 9

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

view full answer...

Answer 10

Yes, the Sleeve-Lock Trailer Coupler #CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring w/ 3-Position Adjustable Channel Bracket #BR43ZR. The bolt holes match as well when it comes to size and spacing so you'll be good…

view full answer...

What Size Lunette Rings Are Compatbile With The Buyers Products 45 Ton Pintle Hook

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching