Storage Cover Recommendation for Furrion Replacement Connector Male # F30MLPSY

Question

Question:

Is F30CVLSY connector cover compatible with F30MLPSY connector? Thanks

asked by: Kent H

0

Expert Reply:

It would not, the cap would not fit over the male metal tabs. Instead you would want the part # F30COVSS to use with the part # F30MLPSY .

expert reply by: Jameson C

0

Answer 1

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 2

Yes, 8 gauge wire will work great with the 30 amp Furrion Outlet part #F30ITSBS without issue.

view full answer...

Answer 3

Lippert does not offer a replacement inner jack tube for their jack 1817941. When a jack is damaged in this way (which is more common than you want to know) it really is best to replace the entire jack for safety reasons. The outer tube on your jack…

view full answer...

Answer 4

Yes, the bulb style that is in the RV Interior Bunk Light with Fan #328-001-103 is a 921 style bulb so for a replacement and upgrade you'd want the 906/921 LED Light Bulb - Wedge Base - 360 Degree - 215 Lumens - Cool White - Qty 2 Item #DI48VR…

view full answer...

Answer 5

I don't have any install instructions for the Furrion Connector Cover part #F30CVLSS which is designed for the Furrion Replacement Connector for RV Power Cord part F30FMPSY but it's pretty easy. If needed, you can indeed enlarge the opening…

view full answer...

Answer 6

The Greystone Standard RV Microwave w/ Trim Kit #324-000106, installs in a cabinet. But, it has a trim ring for aesthetics. You can use shims inside your cutout for a better fit on the sides, but the trim will make everything look clean and finished.…

view full answer...

Answer 7

The EcoHitch #EH97FR that you'd looked at is a Class III with a 2 inch receiver opening. This hitch is pretty expensive because it's constructed of an alloy that combines steel, aluminum and stainless steel, much of which has been recycled.…

view full answer...

Answer 8

The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches, part #HLY84FR, will be able to transport these two bikes. The rack can support up to 80lbs per bike. The rack is also fat tire compatible. The rack can tilt while…

view full answer...

Answer 9

Hey Paul, For the stainless steel version of part #SM78VR you'll just need the SmartPlug RV TV/Internet Inlet - 2 Coaxial Connector - Stainless Steel #SM58FR. This comes with two coaxial connectors but you can always pop one out and install an…

view full answer...

Storage Cover Recommendation for Furrion Replacement Connector Male # F30MLPSY

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching