Does Trailer Hitch Fit 2024 Toyota Grand Highlander XLE

Question

Question:

does curt hitch fit the 2024 toyota grand highlander XLE?

asked by: Stacey

0

Expert Reply:

It does! I verified for you the correct fit for the trailer hitch on your 2024 Toyota Grand Highlander XLE is the following from Curt:

- Curt Trailer Hitch Receiver # C26VV

expert reply by: Kyle S

0

Answer 1

Yes, the Curt cargo carrier 18153 will fit the Curt Trailer Hitch Receiver #C26VV on your 2024 Grand Highlander. The 2" shank matches the 2" receiver on the hitch.

view full answer...

Answer 2

To power the lights on your trailer you need the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector #C59236. This wiring harness uses quick splices to connect to your signal wiring. It also has a powered converter that connects…

view full answer...

Answer 3

I can definitely tell you the required tools, and I assure you, nothing wacky is needed for your 2024 Toyota Grand Highlander to install the Curt Trailer Hitch Receiver #C26VV. All that you need to install this hitch on your '24 Grand…

view full answer...

Answer 4

Yes, it does. The Curt Hitch item #C26VV is the only hitch currently available that fits a 2024 Toyota Grand Highlander. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver.…

view full answer...

Answer 5

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 6

The hands free liftgate of your 2024 Toyota Grand Highlander will still function with the Curt hitch part #C26VV installed but you would need to kick to either side of the hitch opening. Since the exhaust actually hangs lower than the hitch it…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

Below the bumper. The Curt Trailer Hitch item #C26VV mounts to the bottom of your 2024 Toyota Grand Highlander's frame and extends out below the bumper and trim. This installation method requires no cutting of your trim or fascia. The Curt…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Does Trailer Hitch Fit 2024 Toyota Grand Highlander XLE

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching