bing tracking image
Q & A Icon

Replacement Hub and Drum Assembly for 3,500 lb Boat Trailer Axle with #84 Spindles  

Question:

I am searching for a replacement surge brake drum for a boat trailer. Here are the specs: 10” inner diameter 2.5” wide inner dimension 1.978 grease cap opening 1.970-1.983 bearing Buddy 5 on 4.5” 1/2” studs Bearings are L44649 L68149 Grease seal Inner diameter: 1.719 Outer diameter: 2.565 Can you help me narrow this down to the correct drum? Let me know if you need any other measurements.

0

Expert Reply:

Thank you for all of the specs!

To replace your hub/drum assembly I recommend the Trailer Hub and Drum Assembly # AKHD-545-35-G-K which meets all of the specs you gave and has a galvanized finish to it will hold up much better to water exposure than the standard powder coat finish we see on regular hub/drum setups. This comes with a grease cap for a standard spindle but you can swap that out with your Bearing Buddy caps no problem.

Attached is an installation video for you to check out.

expert reply by:
0
Jon G

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>