Recommended Trailer Hitch and Bike Rack for a 2018 Lance Travel Trailer

Question

Question:

I have a 2018 Lance travel trailer, looking to add a hitch that can carry bikes, and or a basket for generator. Not wanting to get rid of the bumper that holds the sewer hoses etc..

asked by: Tony M

1

Helpful Expert Reply:

Your best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry.

We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702.

As far as bike racks go we also have plenty to choose from, however if you have just standard bikes the Thule Hitching Post Pro Bike Rack for 4 Bikes # TH934XTR would work great.

expert reply by: Bryce D

1

Helpful Expert Reply:

Your best bet for your 2018 Lance TT is to use a universal hitch. These hitches are going to be adjustable to fit a variety of frame widths and will work great with hitch mounted accessories like the bikes you plan to carry.

We do have a few size ranges for you to check out; for a 22" to 66" wide frame you'll want # C13704, for a 22" to 72" wide frame you'll want # 13703, and for a 18" to 51" wide frame you'll want # C13702.

For a bike rack we do also have plenty of racks for you to check out, but as long as you're moving standard bikes the Thule Hitching Post Pro # TH934XTR will work great.

expert reply by: Bryce D

1

Answer 1

The Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames #UF35-946403 is an adjustable hitch that will fit inside 2002 Nash 19I with I-beam frame as long as you have clearance at the rear when inserted on the inside of your I-beam. It is…

view full answer...

Answer 2

To add a hitch to your 2019 Lance 2395 Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs item #13703. This hitch fits frames that measure from 22" wide up to 72" wide. This hitch works on box…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 6

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 7

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

Recommended Trailer Hitch and Bike Rack for a 2018 Lance Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching