Trailer Wiring Doesn't Work on Forester
Question:
Installed brand new trailer wiring on my 2019 Subaru Forrester. Turn signals work just fine on the trailer but brake lights don’t come on.
asked by: Joshua S
Expert Reply:
Thank you for your purchase from etrailer of the Wiring Harness # C56040. If your brake lights don't come on but turn signals do there are a number of wiring troubleshooting steps you will have to take. The first thing to do is take a look at your owner's manual to locate any fuses or relays and ensure they are all there and in working order. If they are, in order to determine the specific problem you will need a circuit tester like # PTW2979 to test the connector on your vehicle after disconnecting it from your trailer. Check the wiring going into your harness from your tail lights to see if those wires are carrying the correct signals, if not then the issue is with the vehicle wiring.
If the signals going to your harness are okay, you'll need to test the signals coming out of the harness, and if they are correct then your issue is likely going to be with the trailer side wiring. You will also want to check both your vehicle and trailer connectors for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you are going to need to replace the plug with # 18004 for the trailer side. You'll also need to make sure your grounds are attached to bare metal surfaces and free of any paint, dirt or corrosion.
I have added a link below to a help article on trailer wiring for you to take a look at which may also be of use. Additionally, to help prevent any type of corrosion in your connector, and increase its durability and lifespan I highly recommend using Dielectric Grease for Electrical Connectors # 11755.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Can 2024 Subaru Outback Wagon Curt T-Connector 4-Way Be Ran Under the Vehicle
- Q&A: What is the Best Hitch for a 2024 Subaru Outback?
- Article: Rooftop Cargo Carriers
- Q&A: Curt VS Draw-Tite Hidden Cross Tube Trailer Hitch Receivers For a 2018 Subaru Outback
- Q&A: Difference Between Curt & etrailer Trailer Hitches For 2024 Subaru Crosstrek Wilderness
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Can etrailer 2,000 lb Axle be Flipped