Does Draw-Tite Class I Trailer Hitch Receiver # 24913 Include Ball Mount, Pin and Clip
Question:
code 24913 draw tite hitch for a 2014 toyota corolla says it comes with ball mount ,unlike the curt model, which sells the ball mount separate. i just want to make sure im reading it right, and or its not a typo on the web site, thank you
asked by: Tom
Helpful Expert Reply:
You are correct that the Draw-Tite Sportframe Trailer Hitch Receiver # 24913 includes a ball mount, hitch pin and clip. The Curt hitch # C11265 includes the pin and clip, but not the ball mount.
Please note that the availability of hitches for any given vehicle does not necessarily mean that vehicle can tow a trailer. I was not able to verify any tow rating for your Corolla. Your owners manual or local Toyota dealership should be able to offer clarification of the vehicles capacities.
All three of these Class I light-duty hitches offered for your Corolla share the same 200-lb tongue weight rating and all are suitable for use with compatible Class I accessory items such as bike racks and cargo carriers. Please note that a Class I hitch can carry only 2 bikes, even if the bike rack itself has a higher capacity. The linked article on hitch classes may be worth reading. I have also included links to all Class I hanging-style 2-bike carriers and to Class I cargo baskets in case you are interested in either of these. We recommend a stabilizing strap #18050 be used with all non-trailer loads to help support the hitch.
Please note that if you are using a cargo basket rated for 300-lbs of cargo load, since your hitch is rated to only 200-lbs tongue weight, the actual working weight limit for your cargo will be 200-lbs minus the weight of the carrier itself. The same math applies to a bike rack; you will need to add the weight of your bikes to the weight of the carrier you are using to ensure the total remains within the hitch 200-lb limit.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Leaf Spring for Trailer with Dexter 4,400 lb Axle
- Q&A: Replacement Leaf Spring Replacing Dexter 072-078-00 For 4,400 lb Axle
- Q&A: How To Install HBA-CAM Hydrastar Adapter
- Q&A: 5th Wheel Hitch and Rear Trailer Hitch for a 2005 Freightliner M2 106
- Q&A: How to Determine Correct Rise or Drop for Blue Ox SwayPro Weight Distribution System
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Trailer Maintenance Schedule
- Q&A: Does Muffler Need To Be Removed To Install Draw-Tite 24913 On 2017 Toyota Corolla?
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Tie Down Luggage on a Roof Rack
- Article: Trailer Hitch Receiver Sizes