Recommended Hitch for a 2023 Hyundai Tucson
Question:
2023 Hyundai Tucson. I need a hitch.
asked by: Sue
Expert Reply:
To add a hitch to your 2023 Hyundai Tucson, I recommend the Curt Trailer Hitch item # C94WR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
I really like this hitch because it mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but also helps with ground clearance.
If you are planning on towing you will also need a wiring harness item # CU94FR and a ball mount kit item # C45534. I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
I have linked a couple of installation videos below and attached some pictures so you can see how to get these parts set up and what the hitch will look like once installed.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Best Hitch for a 2024 Hyundai Tucson?
- Q&A: What is the Best Hitch for a 2024 Kia Sportage?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Trailer Hitch for 2023 Hyundai Tucson - All Models
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Comparing the Curt and Draw-Tite Trailer Hitch for a 2022 Hyundai Tucson
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Trailer Hitch Receiver and Wiring Harness For 2023 Kia Sportage
- Q&A: Recommended Ladder Rack System For A 2022 Ford F-150 With A Factory Tonneau Cover
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop