What Circuit Breaker Brands Can Be Used With the Progressive Dynamics 4500 Series Converter Charger

Question

Question:

What brand or make of circuit breakers do I use for progressive dynamics PD4560K18LS8

asked by: Steven E

0

Expert Reply:

For the Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel # PD4560K18LS8 you can use ITE/Siemens – QP, QT, Thomas & Betts – TB & TBBD series, Square D – HOM & HOMT series, Cutler Hammer/Bryant – BR & BRD series, & GE – HACR series.

All of these brands have been approved to be used on both the main and branch circuits.

expert reply by: Bryce D

0

Answer 1

To replace your Iota IDP-240 you'll want to use the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8. This panel is rated for 50 amp service, can provide both 120v/240v and is compatible with…

view full answer...

Answer 2

The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8 does not come with any breakers. You will need to provide those.

view full answer...

Answer 3

I checked with Progressive Dynamics and the breakers for the Progressive Dynamics 4500 Series Inteli-Power Converter #PD4575K18LS8 are 50 amp main. This is also true of the other models of 4500 Series Converter, parts #PD4560K18LS8 and #PD4590K18LS8.…

view full answer...

Answer 4

We do not carry the Trimark brand however, we do carry both Global Link and Bauer brands. These are direct replacements for the original Global Link and Bauer products as well as Lippert Components, Fastec (FIC), and the TriMark standard entry door…

view full answer...

Answer 5

The Progressive Dynamics 4500 Series Inteli-Power Converter #PD4575K18LS8 that you referenced does not come with breakers actually. I attached a picture that has the breaker info for the unit though. You'll need to supply your own. I attached a…

view full answer...

Answer 6

All Progressive Dynamics power centers, including the #PD4560K18LS8 (4500 series), will use the following circuit breaker types: ITE/Siemens – QP, QT Thomas & Betts – TB & TBBD series Square D – HOM & HOMT series Cutler Hammer/Bryant – BR…

view full answer...

Answer 7

The Progressive Dynamics RV Power Control Center with AC/DC Panel part #PD4560K18LS8 has a built-in battery charger which will convert AC current while hooked up to shore power to DC current and then use this to charge the battery bank. This will be…

view full answer...

Answer 8

It is possible to have the 7-way charge line connected along with a converter/battery charger on something like the Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4560K18LS8. A converter/charger such as…

view full answer...

Answer 9

If at all possible you want to mount breaker panels like the #PD4560K18LS8 vertically but if this is not practical you can mount it horizontally as well. I'd recommend checking with an electrician for help with the application.

view full answer...

Answer 10

There is a replacement converter section for your WFCO 8955 with part #PD4655V, but it is not compatible with lithium batteries. If you wanted to only replace the converter section then you could install the Progressive Dynamics Inteli-Power RV…

view full answer...

Answer 11

If the 6 volt batteries were wired in series so that their output voltage was 12 volts you could use the Progressive Dynamics Inteli-Power RV Converter #PD9260C to charge them. This is compatible with flooded lead acid, AGM, and gel batteries.…

view full answer...

Answer 12

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

view full answer...