Will a Curt Q20 5th Wheel Hitch Work w/ the Adapter Rails for the GM Factory Prep Package?

Question

Question:

Can an old Curt Q20 model 16525 be used with the C88KR adapter on 2024 Sierra 2500 with OEM package?

asked by: Michael R

0

Expert Reply:

Thanks for the picture! Yes, it can. The Adapter Rails item # C88KR will drop right down into your 2024 Sierra's factory puck system and provide a base capable of mounting the Curt Q20 item # C16536.

expert reply by: Jerred H

0

Curt Q20
(click to enlarge)

Answer 1

The hitch ball angle adjustment on weight distribution systems is designed to provide more or less distribution of the tongue weight on your trailer hitch to the trailer and vehicle axles. If you adjust the ball angle farther away from the towing…

view full answer...

Answer 2

Yes there is! The Husky 31326 hitch is made to fit the industry standard fifth wheel rails (ISR). The Curt Adapter #C88KR is also made to the same industry standard measurements. So the Curt Adapter #C88KR will be exactly what you need to use your…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The closest thing you'll find to an aftermarket puck system for your 2024 GMC Sierra 3500 is the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1020 which gives you the gooseneck system but also doubles as the anchor point for…

view full answer...

Answer 10

It's a bummer but you can't use a pivoting pin box with a fifth wheel hitch that only attaches to a gooseneck ball as the additional twisting torque that these types of pin boxes but on hitches requires four attachment points instead of just…

view full answer...

Answer 11

Hey Bob, thanks for writing in, and you got yourself one heck of a truck with the 2024 Silverado 2500HD. And though you'll need an adapter since you have the factory prep package you can definitely use the Andersen Ultimate Connection 5th Wheel…

view full answer...

Answer 12

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Will a Curt Q20 5th Wheel Hitch Work w/ the Adapter Rails for the GM Factory Prep Package?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching