What Does Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch # DM49GV Weigh

Question

Question:

What is the weight of this item

asked by: Kent J

0

Expert Reply:

The Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch # DM49GV weigh 47 lb.

expert reply by: Jameson C

0

Answer 1

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 2

Tommy, the B&W Companion OEM 5th Wheel Slider Hitch part #BWRVK3775 is the best option for the 2020 Silverado 3500 short bed with factory prep package. The Companion is your best option because it provides an overall better towing experience.…

view full answer...

Answer 3

As long as the 5th wheel hitch you have mounts to industry standard rails you can use the Curt Adapter Rails #C88KR to make it compatible with the OEM puck system on your 2022 GMC Sierra 3500 short bed. I'm attaching a photo to show what the…

view full answer...

Answer 4

Yes, you can remove the side brackets of your Demco Hijacker #DM8550034 and install the brackets part #DM49GV and the hitch will fit directly to the OEM pucks of your 2020 GMC Sierra 2500 short bed. This would allow you ability to not have to use the…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 10

Hello David. The Correct Track Trailer Alignment and Lift Kit #RR23QX is definitely going to be your best bet for lifting your 2023 Dutchmen 2533RDF. That said, this kit is not made for any one specific camper, so we generally would want you to check…

view full answer...

Answer 11

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 12

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

What Does Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch # DM49GV Weigh

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching