What Size Wire Is Needed to Connect the Furrion Chill Single Zone Controller to DC Power

Question

Question:

What gauge wire needs to go from the RV 12V DC power to this unit? What gauge wire needs to go from the controller to the thermostat?

asked by: Brandon M

0

Expert Reply:

You're going to need a minimum of 12AWG wire for the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup w/ 2 Fan Speeds # FR86NR.

To connect it to the thermostat, you'll just need to connect the 4 wires labeled "to wall thermostat" and you'll be set. I've also included a wiring diagram for you to check out as well.

expert reply by: Bryce D

0

Wiring Diagram
(click to enlarge)

To Wall Thermostat
(click to enlarge)

Answer 1

The 2 brown wires for the furnace on the Controller #FACC12SA-BL are loop wire for the furnace. So these do not matter which of each wire they attach to on your furnace. They simply must not attach to each other so that power travels all the way to…

view full answer...

Answer 2

That is a great question! I reached out to my contact at Furrion and the wires of the Replacement Single Zone Controller for Furrion Chill RV Air Conditioner Setup #FACC12SA-BL have a few different bundles. The first bundle has 6 wires in it and is…

view full answer...

Answer 3

Please see the attached images for wiring diagram and installation instructions for the Furrion Chill Replacement RV Air Conditioner for Furrion Setup, #FR86PR.

view full answer...

Answer 4

E3 is a communication error code between the unit and the thermostat. Check to make sure your wires have no kinks or damage and are making a full connection in the thermostat and in the ac unit. You'll also need to make sure the "A" and…

view full answer...

Answer 5

I checked with SoftStart and they have a diagram for the install of their #SSR54FR on Furrion Chill RV AC units like the #FR58PR that you referenced.

view full answer...

Answer 6

An E3 error code means there's a communication error between the zone controller and the thermostat. Since you've already tried connecting the wires from the thermostat directly to the zone controller (great idea btw) and still are having…

view full answer...

Answer 7

There is a diagram of the wiring for the Furrion #FR58PR in the instructions, but I've gone ahead and linked a photo of the wiring diagram as well as the instructions for this unit.

view full answer...

Answer 8

The Furrion Chill RV Air Conditioner System #FR76FJ does not come with a heat pump. The most similar AC unit we have with a heat strip is the Advent #ACM150CH which has a similar BTU rating of 15k.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

What Size Wire Is Needed to Connect the Furrion Chill Single Zone Controller to DC Power

Product Page this Question was Asked From

Continue Researching