Recommended Front Hitch for a 2023 Ford F-150

Question

Question:

What front hitch do you recommend for a 2023 Ford F-150?

asked by: Jesse M

0

Expert Reply:

To add a front mount hitch to your 2023 Ford F-150, I recommend the Draw-Tite item # 65067. This hitch has a 2" receiver and is custom fit for your F-150. It has a 500 lbs vertical load limit which is what they call tongue weight on the front end.

I have linked an installation video below to help you get this hitch set up.

expert reply by: Jerred H

0

Answer 1

While the Draw-Tite Front Mount Trailer Hitch Receiver #65067 has not yet been confirmed to fit your 2023 Ford F-150, it is safe to say it will still fit as the only changes to the 2023 from 2022 is some trim level changes. I cannot say if the hitch…

view full answer...

Answer 2

I checked with Draw-Tite and the Draw-Tite Front Mount Trailer Hitch Receiver part #65067 is a confirmed fit for a 2023 Ford F-150, all models without an active air dam. This hitch features a bolt-on fit without any drilling required. It will be a…

view full answer...

Answer 3

The Draw Tite Front Hitch part #65067 does fit with the auto deploying air dam of your 2021 Ford F-150.

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver part #65067 which is a fit for a 2021 Ford F-150 is NOT compatible on models with the auto deploying air dam per Draw-Tite. It doesn't look like there is an option for models with this feature so…

view full answer...

Answer 5

I do have an option for you but the only confirmed front mount trailer hitch we currently have for a 2023 Ford F-150 is the Draw-Tite Front Mount Trailer Hitch Receiver part #65067 which is what I recommend. This hitch offers a bolt-on fit and…

view full answer...

Answer 6

The front mount trailer hitch receiver with the best ground clearance once installed on your 2021 Ford F-150 is the Draw-Tite #65067 in which the bottom of the receiver sits just above the bottom of your air dam so you will not lose any ground…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Recommended Front Hitch for a 2023 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching