Adjustable Ball Mount For 2-1/2 Inch Hitch With 8 Inch Drop

Question

Question:

looking for an adjustable ball mount that goes to 8 inch drop and fits a 2-1/2 inch hitch

asked by: Bruce

0

Expert Reply:

We have precisely what you need for an adjustable ball mount that fits your 2-1/2 inch hitch and gives you up to 8 inches of drop. The ball mount is from BulletProof Hitches and is the following part number:

- BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # MD256

The # MD256 gives you up to 8-1/4" of drop (or 8-1/2" of rise), comes with a 2" hitch ball (10k capacity) and 2-5/16" hitch ball (14k capacity). To secure it to your hitch and also lock the mount, use the BulletProof Hitches Receiver Lock for Adjustable Ball Mount # BPH34FR.

expert reply by: Kyle S

0

Answer 1

The BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch #MD256 has an 8-1/4" drop and 8-1/2" rise. BulletProof Hitches does not follow the standard measurement which is where the confusion is coming from. Rise is the distance from the…

view full answer...

Answer 2

The US made #MD256 BulletProof hitch adjustable ball mount for 2-1/2 inch receivers you'd looked at will arrive exactly as shown in our photos on the product description page. The hitch includes the shank, the linch pins/clips and the ball…

view full answer...

Answer 3

We definitely have a lock and an anti-rattle device for your Blue Ox Adjustable 2-Ball Mount - 2-1/2" Hitch #BLU85XR but since this has a solid shank we will need to use 2 pieces as opposed to a part that has them integrated together. I…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 11

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 12

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...