Will Replacement Fat Tire Front Wheel Tray Fit Tire That is 2.8 Inches Wide

Question

Question:

Will this accommodate a tire with a width of 2.8”?

asked by: Keith

0

Expert Reply:

It will accommodate a tire that is 2.8 inches wide. You can have a tire that is up to 5 inches wide with the Replacement Fat Tire Front Wheel Tray for Thule T1 or T2 Classic Platform Bike Racks # 8523598001.

expert reply by: Kyle S

0

Answer 1

I have a solution for you. If you are looking to insert the Replacement Tray Endcap for Thule T2 Pro XT Platform Bike Racks #8528006001, you are correct that you need one screw and one washer per end cap. For the screw, you need the Replacement Self…

view full answer...

Answer 2

The replacement hardware for your Thule T2 is the following: Replacement Hex Bolt for Thule T2 Classic Platform Bike Racks - Qty 1 #8537012 Replacement Button Head Screw for Thule T2 Pro Platform Bike Racks - 5 mm - Qty 1 #853597604 Replacement Self…

view full answer...

Answer 3

We do have replacement hardware for the Thule T2 Classic 2 Bike Rack TH9044. The specific bolt that holds the tire tray in place is the Replacement Slotted Cutting Bolt for Thule T2 Classic Bike Platform Rack #TH34FR. This bike rack uses 2 of these…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will Replacement Fat Tire Front Wheel Tray Fit Tire That is 2.8 Inches Wide

Product Page this Question was Asked From

Continue Researching