Recommended Trailer Hitch For A 2016 Mazda 3 Sedan
Question:
Hi, Im looking to purchase a trailer hitch for a 2016 Mazda3 Sedan, I believe the hatch + sedan are different part #. Could you send me a link to the correct part? Also, I am mainly looking to tow a motorcycle trailer + 1 motorcycle, would a class 1 be able to handle the weight? Car has a manual transmission Thank you
asked by: Eugene B
Expert Reply:
I can definitely help set you up. You are correct in that the fitment is different for the sedan and hatchback models. For your 2016 Mazda 3 sedan I recommend the Draw Tite Class 1 # 24912. I prefer this hitch over the others we offer mainly because it will be the easiest to install. The other hitches require trimming of the bumper fascia, while the # 24912 will not. This is a standard class 1 hitch rated for towing up to 2,000 lbs. So as long as your trailer and motorcycle weigh 2,000 lbs or less combined, this will be up to the task.
For a wiring harness I recommend the Tekonsha # 118405. This is a standard T-harness that plugs in behind your tail lights. You do also need to run a wire to the battery for 12v power. This has a 4-flat trailer connector, which will be all you need for a small motorcycle trailer.
I have linked our install video below if you want to take a look.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Solution for Install Bolts that Seem too Big to Install Draw Tite Hitch 24914
- Q&A: Does Draw Tite Hitch # 24914 Fit 2017 Mazda 3 Hatchback w/ Appearance Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Are There Any Pictures of the RockyMounts WestSlope Bike Rack on a 2014 Subaru Crosstrek
- Q&A: Should Trailer Wiring Be Installed with Trailer Hitch or Can it Wait til Later
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Recommended Wheelchair Carrier for 1-1/4 Inch Trailer Hitch on 2002 Mercury Mountaineer
- Q&A: Torklift Front Tie Down for 1991 Ford F-250 4x4 Long Bed without Running Boards
- Q&A: Will Clamp From WestSlope Bike Rack Touch Front Forks on Bike
- Article: Trailer Hitch Installation Tips
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit