Is There A Rebuild Kit Available For A Blue Ox Avail Tow Bar

Question

Question:

Do you carry a rebuild kit for Blue Ox Avail tow bar? Mine no longer latches/locks on one side. Thanks

asked by: Kelly F

0

Expert Reply:

We currently offer a replacement washer kit # BLU46XR for the Blue Ox Avail Non-Binding Tow Bar # BX7420 so you would need to reach out to Blue Ox directly for repair. I do know that Blue Ox has a 3-year warranty for their tow bars and will replace/repair broken components for free.

expert reply by: Kevin C

0

Answer 1

You do want to have your tow bar sitting as level as possible when you are flat towing. Otherwise you will have suspension components and tire wear/failure on the tow vehicle. Ideally you are as level as possible but if you can get within 3 inches…

view full answer...

Answer 2

We used to but Blue Ox stopped offering it to us so we stopped carrying it. It was basically replaced by the Blue Ox Avail part #BX7420 which is also a 10k rated tow bar but with longer arms to help improve turning radius when flat towing. Check…

view full answer...

Answer 3

Yes, you could use the Replacement Shank for Gen-Y Adjustable Ball Mount #325-GH-503 with a flat towing setup like you mentioned and it would give you right at the amount of drop you are looking for.

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 8

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 9

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 12

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Is There A Rebuild Kit Available For A Blue Ox Avail Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching