Will Redarc Wiring Adapter Fit a 2023 Nissan Frontier with the Factory Tow Package

Question

Question:

I ordered and received a Tow Pro Liberty RED24FR EBRH-ACCNA0 and a plug and play wire harness RED39FR TPH-014 for a 2023 Nissan Frontier. The fitting instructions in the package say the wire harness is only for a Nissan Frontier year 2005 - 2019. Will this work on my new 2023 Frontier?

asked by: Britt H

0

Expert Reply:

The Redarc instructions for the Plug-and-Play Wiring Harness # RED39FR you purchased only lists through 2019 because they haven't updated the instructions as of yet, but the adapter will fit your 2023 Nissan Frontier and allow you to install the Tow-Pro Liberty # RED24FR.

expert reply by: Jon G

0

Answer 1

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 2

You will want to choose a weight distribution hitch where your loaded tongue weight, which for a Lance 1575 with a GVWR of 3700-lbs should be no more than 555-lbs and will most likely be closer to 400-lbs. Based off those specs I recommend using the…

view full answer...

Answer 3

When it comes to installing The Redarc Tow-Pro Liberty #RED52VR if there is no trailer connected, the active calibration may occur as normal without any indication from the LED., provided your brake light trigger point is active when there is no…

view full answer...

Answer 4

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 7

To install the Redarc Tow-Pro Liberty Trailer Brake Controller #RED24FR you were looking at all you will need is the Plug-In Adapter #RED39FR. This will plug into the controller of the #RED24FR and then plug directly into the factory trailer brake…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Will Redarc Wiring Adapter Fit a 2023 Nissan Frontier with the Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching