Recommended Hitch for a 2023 Ford Bronco
Question:
I would like to add a hitch to my 2023 Ford Bronco. Which is the best option?
asked by: Erica
Expert Reply:
The best option to add a hitch to your 2023 Ford Bronco is the Curt Trailer Hitch item # C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and 350 lbs maximum tongue weight.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.
If you are planning on towing you will also need a wiring harness item # C42WR for LED lights or item # C87BR for incandescent lights and a ball mount kit item # C45534.
I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure the 4-way connector to your hitch. This will put it in an easy to reach spot and prevent the risk of it falling onto the road.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- Pre-Torqued
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- No Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 4500 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- No Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Trailer Hitch Receiver & Wiring For 2022 Jeep Grand Cherokee WL
- Q&A: Recommended Trailer Hitch for 2024 Ford Bronco Carrying Bike Rack
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Trailer Wiring that Connects to Vehicle Battery Drain the Vehicle Battery When not Towing
- Q&A: Hitch Pin Location for Curt and Draw-Tite Trailer Hitches on a 2022 Ford Bronco
- Article: My Trailer Hitch Doesn't Fit
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Comparing Curt and Draw-Tite Trailer Hitch Receivers For a 2024 Ford Bronco
- Q&A: What Size Bolts Are Used To Secure a Trailer Hitch To the Bumper On a 2006 GMC Sierra 1500
- Q&A: Comparing Curt and Draw-Tite Hitch Receiver Locations for a Bike Rack on a 2024 Ford Bronco
- Article: How to Measure for Trailer Hitch Drop
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Trailer Wiring Diagrams