Roof Rack that Fits Camper Shell Roof Rack Tracks

Question

Question:

Hello Im interested in getting some crossbars for my are bed cap but Im not sure what I need as I see you have a lot of different options I have flat roof rails from front to back of bed cap but I dont know what would fit I tried to look at pictures but I cant tell for sure

asked by: Albert C

0

Expert Reply:

It sounds like your camper shell has factory tracks on it which is what the Rhino Rack Roof Rack part # Y02-480B-NT is designed to fit. This rack was designed to fit channels just like what you have on your camper.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars #Y02-480B-NT will work just fine with your LEER camper shell with 45" tracks. Since you already have tracks on your camper shell you'd just need to attach the feet and…

view full answer...

Answer 2

Yes, the Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero Crossbars - Black - 54" Long, part #Y02-480B-NT, will fit the tracks on your Leer topper. I have included a product description link below.

view full answer...

Answer 3

Yes, the Replacement Anchor Plate "A" for Yakima LandingPad 1 (QTY 8), part #Y8810074, will work with the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 55" Long - Qty 2, part #RTC14. I have included a product description link…

view full answer...

Answer 4

Yes, the Yakima Landing Pad 1 part #Y00221 does fit the Rhino Rack roof track part #RTC14 that you also referenced.

view full answer...

Answer 5

The Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount like #RTC16 will work with the Thule Tracker II feet. The Rhino-Rack Tracks are the same size as the Thule tracks.

view full answer...

Answer 6

No, you cannot cut the crossbars on the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT down to a shorter size. The channels on the bottom of the crossbar do not run all the way down the bar. So cutting them could impact the mounting…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Roof Rack that Fits Camper Shell Roof Rack Tracks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching