Do I Need the 7-Way Vehicle Power Adapter for Furrion Cameras w/ a 2021 Ram 3500?

Question

Question:

Will I need this on my 2021 Ram for use on 2019 Grand Design SOLITUDE?

asked by: Larry W

0

Expert Reply:

Yes, you will. The 7-Way Vehicle Power Adapter for Furrion RV Observation Camera item # FR87PR will make sure your 2021 Ram 3500 is supplying a consistent power source to your trailer to power the observation camera system without interruption.

expert reply by: Jerred H

0

Answer 1

There is some accuracy to what you read on the forum. But no worries, we can provide a solution. You simply need the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera, #FR87PR. This will resolve your connection issues…

view full answer...

Answer 2

Yes, every trailer that has the pre-existing wiring for the Furrion Vision S, like #FOS05TASF that you referenced, powers the camera via the running light circuit. So, you will need to have the trailer wiring hooked up to your tow vehicle and the…

view full answer...

Answer 3

Yes, the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera #FR87PR is the correct fix for your 2022 GMC Sierra 3500HD. The newer GM trucks had an issue with their running lights circuit not providing enough amperage…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 6

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 7

We definitely know about the issue you are referring to. We have just the part for you! Furrion recently came out with a brand new adapter for your 2022 GMC Sierra 1500 Limited to work with your camera system. The part you need is the 7-Way Vehicle…

view full answer...

Answer 8

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 9

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 10

Chad, the etrailer Trailer Hitch Receiver #e54KR you're looking at is not going to work with your 2023 Subaru Outback Wilderness; Instead, you'd want to use the etrailer Trailer Hitch Receiver #e25TR. This hitch is virtually the exact same…

view full answer...

Answer 11

You do not have to change the connector or add the PWM filter that splices in; all you have to do is add an adapter that plugs into the 7-way of your 2023 Chevy Silverado to get the correct amount of power to your Furrion Vision S camera system. What…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Do I Need the 7-Way Vehicle Power Adapter for Furrion Cameras w/ a 2021 Ram 3500?

Product Page this Question was Asked From

Continue Researching