Determining The Correct Replacement Tires For A 1993 Fleetwood Wilderness Travel Trailer

Question

Question:

What size tires go on a 1993 Fleetwood Wilderness 28ft?

asked by: Amy

0

Expert Reply:

There is no guide for what size tires would be on your 1993 Fleetwood Wilderness, but if you still have some tires on it we could get the tire size code off of the sidewall to find the correct replacements. For example, the Karrier ST225/75R15 Radial Trailer Tire # AM10256 has its size (ST225/75R15) molded to the sidewall. If you can get me a picture of your tire size code then I'd be happy to find the replacement for you.

expert reply by: Kevin C

0

Sidewall Tire Size
(click to enlarge)

Answer 1

The 7.00-15LT tires you have on your 1978 Avion trailer have a 29.4" diameter, have a load range that should be in the 2,400 lb vicinity and fit wheels that are 5", 5-1/2" and 6". For comparable tires I recommend…

view full answer...

Answer 2

Technically, a trailer rated for 10,000 lbs can have 5 lug hubs. They are most common on 3,500 lb axles but can be used on the rare 4,000 lb axles as well. You could have a gooseneck or 5th wheel trailer with the 10,000 lb capacity and tandem axle…

view full answer...

Answer 3

Good news, I can help you find a tire for your Sundown Horse Trailer. The 205/90-15 is a close tire size to the 7.00-15. The closest size to a 7.00x15 tire that we offer would be a 225/75-15. One 225/75-15 tire that could work for you is the Kenda…

view full answer...

Answer 4

I am fairly certain your 1991 Fleetwood Wilderness uses 10 x 2-1/4 inch brakes. But to be sure you can measure the inner diameter and depth of a drum. For a pair of brake in this size I recommend etrailer brakes #AKEBRK-35-SA which includes a left…

view full answer...

Answer 5

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

view full answer...

Answer 6

The B&W Tow & Stow 2-Ball Mount - 2.5" Hitch item #BWTS20037B does not have a maximum tongue weight. The 2-5/16" hitch ball has a 18,000 lbs capacity and the 2" hitch ball has a 7,500 lbs capacity. B&W says if you stay…

view full answer...

Answer 7

As you can see from the diagram I made for you, the total height is 10-5/8" for the Curt Adjustable 2-Ball Mount #C45902. The #C45902 is for 2-1/2" hitches, comes with a dual 2" and 2-5/16" hitch ball with 10k and 20k respective…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...