Correct Timbren and SumoSprings for 2022 Grand Design Solitude 3540GK

Question

Question:

I have a 2022 grand design 3540 fifth wheel and would like to know which TIMBREN and SUMO bump stop fits it. asked by: Larry C Expert Reply: The correct Timbrens for your 2022 Grand Design 3540 are the part # T92MR that you referenced and the correct SumoSprings are the part # SS33HR. I sent several follow up emails and photos because this is wrong info the axles are on the bottom and spring is on top so they won’t work

asked by: Larry C

0

Expert Reply:

I apologize for any confusion from the previous response. The 2022 Grand Design Solitude 3540GK does in fact come with 7,000 lb overslung axles. The correct Timbren is the # TTRA1032 which works with both the underslung and overslung configuration.

The correct SumoSprings are the # SS26MV. If I were to recommend one it would be the SumoSprings. They will give you a smoother ride when compared to the stiffer Timbren.

expert reply by: Robin H

0

Answer 1

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 2

Normally weight distribution is the best option when squat is caused by a coupled trailer. But since the manufacturer of the trailer specifically said not to use it the next best option would be suspension enhancement for your 2014 Ram 1500. I do…

view full answer...

Answer 3

For occasional towing with your 2011 Dodge Ram 1500, I would go with the Timbren suspension enhancement system. If you do not have a Quad Cab, use #TDR1500DS. If you do have a Quad Cab, use #TDR1500DQ (instructions linked for reference). The…

view full answer...

Answer 4

For your 2017 Ram 1500 the Timbren kit part #TDR1500DS would be your best Timbren option for your application where you'd be hauling a 17 foot ice castle fish house. This will give you the best balance between support and ride quality.

view full answer...

Answer 5

Even though you'll be towing a pretty heavy trailer I would go with the lightest duty Timbren part #TDR1500DS that fits your 2019 Ram 1500 as this will give you the support you want without destroying your truck's ride quality.

view full answer...

Answer 6

Generally speaking, a properly rated and installed weight distribution system will not require the use of additional suspension enhancements. However, I am aware of the factory rear coil springs on your 2017 Ram 1500 and their tendency to sag.…

view full answer...

Answer 7

The Timbren Rear Suspension Enhancement System #TDR1500DQ is a great fit for your truck as long as it isn't a regular cab and doesn't have the factory air system. If you do have the regular cab then you instead will use #TDR1500DS. Either…

view full answer...

Answer 8

Installing the Timbren #TDR1500DS Aeon springs on your 2022 Ram 1500 won't have any effect on your vehicle warranty. Purchasers of aftermarket vehicle accessories are protected by the federal Magnusson-Moss warranty act. In summary, the act…

view full answer...

Answer 9

I recommend the Timbren #TDR1500DS for your 2016 Ram 1500. They're for standard occasional towing with a capacity of 6,000 pounds. They're confirmed on your Ram as long as you don't have a factory air suspension system. The 6,000 pound…

view full answer...

Answer 10

A Timbren kit like the part #TDR1500DS that fits your 2019 Ram 1500 will be a great solution to beef up the rear suspension and help tow your travel trailer. This has a support capacity of 6,000 lbs which will do a great job to give you the…

view full answer...

Answer 11

Your camper that weighs 6,000 lbs is going to have a tongue weight figure of 600-900 lbs so based on that I would go with a lighter duty Timbren part #TDR1500DS which has the 6,000 lb rating. The problem with the higher capacity Timbrens is that they…

view full answer...

Answer 12

The correct SumoSprings Trailer Helper Springs for overslung axles (axle under leaf springs) is part #TSS-107-40. The springs will be pre-loaded upon installation therefore the space you have between the frame is spring loaded will be less than the…

view full answer...

Correct Timbren and SumoSprings for 2022 Grand Design Solitude 3540GK

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching