Is Spring Sold Separately From Ratchet Repair Kit For Fulton 2-Speed Winches

Question

Question:

Winch repair kit 50133 includes a small spring. Is that spring sold separately? If so what is the part number.

asked by: Douglas J

1

Helpful Expert Reply:

Yes, the spring that is part of the Ratchet Repair Kit for Fulton 2-Speed Winches 501133 is indeed sold separately. What you are looking for is the following part:

- Replacement 2-Speed Ratchet Spring for Fulton Hand Winches # F86ZR

expert reply by: Kyle S

1

Answer 1

I spoke with my contact at Fulton regarding the Ratchet Repair Kit #F501133 referenced in your question for your T3205 Fulton Winch. He stated that this is an older, discontinued winch, but he was able to verify that the ratchet itself in the kit,…

view full answer...

Answer 2

The only replacement part available for the Jif 2-Speed Boat Trailer Winch #315-W3200D is the Hand Winch Strap with Safety Hook #DL24242.

view full answer...

Answer 3

Nearly all of the Fulton winches can connect to the same mounting brackets as they all have very universal mounting slots. If you have a Fulton F2 #FW16000101 currently the 3,200 lb version XLT #F142425 that you are interested in would bolt right up…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

For all intents and purposes, yes, the Fulton drop leg stabilizer jack SJL80300 is the same as the square leg jack you asked about: - Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs #SJ-R208 Different manufacturers but otherwise they…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Is Spring Sold Separately From Ratchet Repair Kit For Fulton 2-Speed Winches

Product Page this Question was Asked From

Continue Researching